storagefaults.comstoragefaults.com

Tesla•Powerwall

Analysis by Marcus & Team

Tesla Powerwall: Battery Standby During VPP Event

Troubleshooting Tesla Powerwall showing 'Battery Standby' during a Virtual Power Plant (VPP) event. Check network connectivity, app settings, and firmware.

Frequently Asked Questions

•What is the typical Modbus TCP register address for real power output on a Powerwall 2?

Consult the official Tesla Modbus documentation for the Powerwall 2. Register addresses can vary based on firmware version. However, common registers include those for AC power output, battery state of charge (SOC), and system status.

•How do I find the Tesla Gateway's IP address in order to troubleshoot network connectivity?

The Tesla app may display the Gateway's IP address in the advanced settings or network configuration section. Alternatively, you can access your home router's administration interface to identify the IP address assigned to the Tesla Gateway based on its MAC address.

•What are the default firewall ports required for Tesla Powerwall VPP communication?

Tesla uses standard HTTPS (port 443) for most cloud communication. While specific VPP-related ports may be dynamic, ensure that outbound HTTPS traffic is allowed through your firewall. Consult Tesla's documentation for any specific port requirements related to VPP participation.

Related questions

Loading related questions...

Marcus leads the technical research department at Storage Faults. Together with a team of systems analysts, he specializes in translating complex solar storage error codes into actionable diagnostic steps for the US market.

← Back to list

Important Warnings:

Always follow Tesla's recommended procedures when interacting with the Powerwall system. Do not attempt any repairs or modifications beyond software configuration. Protect your Tesla account with a strong, unique password and enable two-factor authentication. Be aware that unauthorized access to the Powerwall system could lead to data breaches or system malfunctions.

Step-by-Step Fix:

1

Verify Wi-Fi or Ethernet connectivity of the Tesla Gateway via the Tesla app (check network status).
2

Ensure the Tesla app is updated to the latest version.
3

Restart the Tesla app and allow it to fully synchronize with the Tesla cloud.
4

Check Powerwall VPP settings in the Tesla app, confirming participation is enabled and schedules are correct.
5

Manually initiate a Powerwall backup test to verify battery functionality outside of VPP events.
6

If connectivity issues persist, power cycle the Tesla Gateway (via the DC disconnect switch, followed by the AC breaker for the Gateway itself; wait 2 minutes after disconnect) and then re-establish Wi-Fi or Ethernet connection.
7

Contact Tesla support if the issue remains unresolved after completing these steps.

Common Causes:

Technical Background:

The Tesla Powerwall system relies on robust communication between the Powerwall unit, the Tesla Gateway, and the Tesla cloud servers. VPP events are triggered remotely via cloud commands. The Gateway processes these commands and instructs the Powerwall to discharge energy to the grid. Failure in any communication link (Wi-Fi, Ethernet, cellular) or software component (firmware, app) can result in the 'Battery Standby' status. Modbus TCP communication between the Gateway and Powerwall may be interrupted.

What to Look For:

The Tesla Powerwall system indicates 'Battery Standby' in the Tesla app during a scheduled or active Virtual Power Plant (VPP) event. This prevents energy export to the grid, reducing potential VPP revenue and impacting grid stabilization efforts.

Preventative Care:

Regularly update the Tesla app and Powerwall firmware to ensure compatibility and security
Periodically check the Tesla Gateway's network connectivity
Review Powerwall VPP settings in the Tesla app monthly
Monitor Powerwall performance during VPP events to identify any recurring issues
Consider a dedicated, reliable Wi-Fi network solely for the Powerwall system