Bluetti Battery Error Codes

Complete diagnostic guide for Bluetti energy storage systems including portable power stations and home battery systems.

Inverter Errors

Error codes related to inverter operation, overload, temperature, and short circuit issues.

Code	Meaning	Possible Causes	Solutions
E001	Inverter overload	•Load demand exceeds inverter capacity •Multiple high-power devices connected •Inverter capacity exceeded •Peak load too high	Check power consumption of connected devices Reduce load if it is too high Disconnect unnecessary devices Check inverter capacity rating Verify load does not exceed maximum capacity Wait for load to decrease before reconnecting
E002	Inverter overtemperature protection - AC output disabled	•Inverter temperature too high •Inadequate ventilation •Ambient temperature too high •Continuous high load •Cooling system issue	Wait 10 minutes for device to cool down Turn AC output back on after cooling Ensure adequate ventilation around device Check ambient temperature Reduce load if possible Move device to cooler location if needed
E003	Inverter short circuit	•Short circuit in connected devices •Faulty device connection •Damaged wiring •Overcurrent condition •Electrical fault	Check connected devices for short circuits Disconnect all devices Check power consumption Reduce load if necessary Inspect wiring for damage Reconnect devices one at a time to identify fault Contact Bluetti support if issue persists

PV (Solar) Input Errors

Error codes related to solar panel input, voltage, and temperature issues.

Code	Meaning	Possible Causes	Solutions
E033	PV overvoltage	•PV input voltage exceeds maximum limit •Too many solar panels connected •String voltage too high •PV voltage rating exceeded	Ensure PV input voltage is within allowable range (e.g., 12V to 60V depending on model) Check solar panel string configuration Verify total PV voltage does not exceed maximum Review system design and panel count Reduce PV string voltage if necessary Check PV voltage specifications for your model
E039	PV overtemperature	•PV input temperature too high •Ambient temperature too high •Inadequate ventilation •Direct sunlight on device	Wait 10 minutes for device to cool down Reactivate PV input after cooling Ensure adequate ventilation Check ambient temperature Move device to cooler location if needed Avoid direct sunlight on device

DC Output Errors

Error codes related to DC output, short circuits, and temperature issues.

Code	Meaning	Possible Causes	Solutions
E065	DC output short circuit	•Short circuit at DC output •Faulty DC device connection •Damaged DC wiring •Overcurrent condition •DC device fault	Check connected DC devices for short circuits Disconnect all DC devices Check DC power consumption Reduce load if necessary Inspect DC wiring for damage Reconnect DC devices one at a time to identify fault Contact Bluetti support if issue persists
E068	DC output overtemperature	•DC output temperature too high •Inadequate ventilation •Continuous high DC load •Ambient temperature too high	Wait 10 minutes for device to cool down Restart devices after cooling Ensure adequate ventilation Check ambient temperature Reduce DC load if possible Move device to cooler location if needed

Battery Temperature Errors

Error codes related to battery temperature during charging and discharging operations.

Code	Meaning	Possible Causes	Solutions
E085	Charge temperature too high	•Battery temperature too high for charging •Ambient temperature too high •Inadequate ventilation •Continuous charging in hot conditions	Allow device to cool down before charging again Check ambient temperature Ensure adequate ventilation Move device to cooler location Wait for temperature to decrease Avoid charging in direct sunlight
E086	Charge temperature too low	•Battery temperature too low for charging •Ambient temperature below minimum •Device in cold environment	Ensure device is in ambient temperature of 0°C to 40°C Move device to warmer location Allow device to warm up before charging Check installation location Review temperature requirements for your model
E087	Discharge temperature too high	•Battery temperature too high for discharging •Ambient temperature too high •Inadequate ventilation •Continuous high load	Allow device to cool down before discharging again Check ambient temperature Ensure adequate ventilation Reduce load if possible Move device to cooler location Wait for temperature to decrease
E088	Discharge temperature too low	•Battery temperature too low for discharging •Ambient temperature below minimum •Device in cold environment	Ensure device is in ambient temperature of -20°C to 40°C Move device to warmer location Allow device to warm up before use Check installation location Review temperature requirements for your model

Battery Operation Errors

Error codes related to battery charging, discharging, capacity, and performance issues.

Code	Meaning	Possible Causes	Solutions
BATT-001	Battery not charging	•Charging disabled in settings •Battery at full capacity •Temperature protection •PV input issue •AC charging issue	Check battery charge settings Verify battery state of charge Check battery temperature Verify PV input or AC charging connection Check charging source Review system settings
BATT-002	Battery not discharging	•Discharge disabled in settings •Battery at minimum charge •Temperature protection •Load demand insufficient •System configuration	Check battery discharge settings Verify battery state of charge Check battery temperature Verify load demand Review system operating mode Check system settings
BATT-003	Battery voltage too low	•Battery deep discharge •Battery capacity degradation •Charging system failure •Battery aging	Check battery state of charge Verify charging system operation Check battery capacity Monitor battery voltage Charge battery if safe to do so Contact Bluetti support if issue persists
BATT-004	Battery capacity degradation	•Normal aging •Excessive cycling •Temperature extremes •Deep discharge cycles •Manufacturing defect	Monitor capacity trends Check battery age and usage patterns Review operating temperature history Contact Bluetti support for capacity analysis Consider warranty claim if capacity is below expected

Communication and Monitoring Errors

Error codes related to system communication, monitoring, and app connectivity.

Code	Meaning	Possible Causes	Solutions
COMM-001	Bluetti app connection error	•Internet connection lost •Device offline •Bluetti servers unreachable •App configuration issue •Bluetooth connection issue	Check internet connection Verify device is online Restart Bluetti app Check Bluetooth connection Verify device is in range Contact Bluetti support if issue persists
COMM-002	Device communication failure	•Communication cable issue •Bluetooth connection lost •WiFi connection lost •Firmware issue	Check communication connections Restart device Check Bluetooth/WiFi settings Update firmware if available Reset device if necessary Contact Bluetti support
DATA-001	Data logging or monitoring error	•Storage full •Data logging module failure •Firmware issue •Memory error	Check available storage Clear old data if possible Update firmware Reset data logging module Contact Bluetti support for advanced troubleshooting

Power and Electrical Errors

Error codes related to power supply, electrical connections, and circuit protection.

Code	Meaning	Possible Causes	Solutions
PWR-001	Battery power loss detected	•Power supply interruption •Battery disconnected •Electrical fault •System shutdown	Check power supply Verify battery connections Check for electrical faults Restart device Contact Bluetti support if issue persists
PWR-002	AC input error	•AC input voltage out of range •AC input frequency out of range •AC connection fault •Grid issue	Check AC input voltage Verify AC input frequency Check AC connection Verify grid connection Contact Bluetti support if issue persists
ELEC-001	Electrical connection fault	•Loose connections •Corroded terminals •Damaged wiring •Improper installation	Shut down device before inspection Check all electrical connections Inspect for corrosion or damage Verify proper connections Contact qualified technician for repairs

System and Safety Errors

Error codes related to system-level issues, safety systems, and critical faults.

Code	Meaning	Possible Causes	Solutions
SYS-001	System fault requiring service	•Internal component failure •Firmware error •Hardware malfunction •Safety system activation	Do not attempt to repair Check device display for detailed error Document error code and symptoms Contact Bluetti support immediately Do not bypass safety systems Schedule service if needed
SAFE-001	Safety system activated	•Safety protection triggered •Emergency shutdown •Critical fault detected •System protection	Do not attempt to restart without diagnosis Check for obvious safety hazards Review all error codes Contact Bluetti support Do not bypass safety systems Wait for qualified technician
FW-001	Firmware error	•Firmware corruption •Failed firmware update •Incompatible firmware •Software bug	Do not attempt firmware update without proper knowledge Contact Bluetti support for firmware update Verify firmware version compatibility Follow manufacturer update procedures Contact support for assistance

ℹ️

Important Information

If you encounter persistent errors or are unable to resolve an issue using the solutions provided, contact Bluetti customer support or a qualified technician for professional assistance. Battery systems involve high voltage DC electricity, which can be extremely dangerous. Never attempt to repair electrical components, wiring, or battery modules yourself unless you are a qualified and certified technician. Different Bluetti models may have model-specific error codes—always consult your device's documentation and the Bluetti app for the most accurate information.

For technical support, contact Bluetti customer service or consult a qualified technician for expert assistance.

Safety Information: Battery systems operate at high voltages that can cause serious injury or death. Always shut down the device properly before any work. DC electricity from batteries is present whenever the battery is charged, even if the device is off. Never work on battery systems without proper safety equipment and training. Always follow lockout/tagout procedures. Working with battery systems requires specialized training and certification. If you are unsure about any procedure, contact a qualified technician immediately. Never bypass safety systems or attempt repairs you are not qualified to perform.

🔧

Troubleshooting Guidelines

Common Resolution Steps

✓Check Bluetti app for detailed error information
✓Verify device is properly shut down before any inspection
✓Check device display for error codes and status
✓Verify network connection for monitoring system
✓Check device temperature and ventilation
✓Document error codes and device status for service calls
✓Contact qualified technician for electrical issues

Prevention Strategies

✓Schedule regular professional maintenance
✓Ensure adequate device ventilation (minimum clearance required)
✓Monitor device performance regularly through Bluetti app
✓Maintain proper operating temperature range
✓Keep device documentation accessible
✓Maintain proper network connectivity
✓Follow manufacturer maintenance schedule

❓

Frequently Asked Questions

What does error code E001 mean on my Bluetti device?

Error code E001 indicates inverter overload. Check power consumption of connected devices, reduce load if it is too high, disconnect unnecessary devices, check inverter capacity rating, and verify load does not exceed maximum capacity. Wait for load to decrease before reconnecting devices.

What should I do if I see error code E002 (inverter overtemperature)?

Error code E002 indicates inverter overtemperature protection has activated and AC output is disabled. Wait 10 minutes for device to cool down, turn AC output back on after cooling, ensure adequate ventilation around device, check ambient temperature, reduce load if possible, and move device to cooler location if needed.

Why is my device showing error code E033 (PV overvoltage)?

Error code E033 indicates PV input voltage is too high. Ensure PV input voltage is within allowable range (e.g., 12V to 60V depending on model), check solar panel string configuration, verify total PV voltage does not exceed maximum, review system design and panel count, and reduce PV string voltage if necessary.

How do I fix error code E085 (charge temperature too high)?

Error code E085 indicates battery temperature is too high for charging. Allow device to cool down before charging again, check ambient temperature, ensure adequate ventilation, move device to cooler location, wait for temperature to decrease, and avoid charging in direct sunlight.

What causes error code E086 (charge temperature too low)?

Error code E086 indicates battery temperature is too low for charging. Ensure device is in ambient temperature of 0°C to 40°C, move device to warmer location, allow device to warm up before charging, check installation location, and review temperature requirements for your model.

How often should I maintain my Bluetti device?

Regular maintenance helps prevent many error codes. Ensure adequate ventilation (minimum clearance required), monitor device performance regularly through the Bluetti app, maintain proper operating temperature range, schedule professional maintenance as needed, and follow manufacturer recommendations for your specific model.

Can I repair Bluetti devices myself?

Some basic troubleshooting like checking the Bluetti app, verifying connections, and checking status indicators can be done safely. However, all electrical work, wiring repairs, and battery repairs must be performed by qualified and certified technicians. Battery systems involve high voltage DC electricity that can be extremely dangerous. Always contact a qualified technician for electrical issues.

💡

Need Additional Help?

Search our complete knowledge base to find detailed solutions for your specific battery system problem.

Go to Knowledge Base

📝

Summary

Proper interpretation of Bluetti battery error codes is essential for efficient troubleshooting and maintenance. This comprehensive reference enables quick problem identification and guides appropriate response actions. Bluetti devices display error codes through the device display and Bluetti app to indicate specific issues. Understanding these codes helps maintain device performance and maximizes energy storage efficiency. Bluetti manufactures portable power stations and home battery systems, each with model-specific features and error code systems. This guide provides diagnostics and solutions for all common Bluetti battery error codes.

ℹ️For persistent errors or issues that cannot be resolved using this guide, contact Bluetti customer support or consult a qualified technician for professional assistance. Some errors may require technical support, component replacement, or specialized diagnostic equipment. Always document error codes and symptoms when contacting support for faster resolution. Note that error code formats may vary by device model and software version—always consult your specific device's documentation and the Bluetti app for the most accurate information. Safety should always be the top priority when working with battery systems. Battery systems involve high voltage DC electricity that can cause serious injury or death. Never work on battery systems unless you are a qualified and certified technician. Always follow proper safety procedures and lockout/tagout protocols.