storagefaults.comstoragefaults.com

LG Energy Solution•RESU Prime

Analysis by Marcus & Team

LG RESU Prime Error 70: Troubleshooting Guide

Diagnose and fix LG RESU Prime Error 70. Learn causes, solutions, prevention, and safety measures for your residential battery system.

Frequently Asked Questions

•What is the typical lifespan of the LG RESU Prime battery?

The LG RESU Prime battery typically has a lifespan of 10 years or more, depending on usage patterns and environmental conditions. Regular maintenance and proper operation can extend its lifespan.

•How do I update the firmware on my LG RESU Prime?

Firmware updates can usually be performed through the LG RESU monitoring app or by a qualified technician. Refer to the LG RESU Prime owner's manual for specific instructions.

•What are the warranty terms for the LG RESU Prime battery?

The warranty terms vary depending on the installation date and location. Consult the LG Energy Solution website or contact your installer for the specific warranty details for your system.

Related questions

Loading related questions...

Marcus leads the technical research department at Storage Faults. Together with a team of systems analysts, he specializes in translating complex solar storage error codes into actionable diagnostic steps for the US market.

← Back to list

Technical Background:

The LG RESU Prime system comprises multiple battery modules connected in series to achieve the desired DC voltage (typically 400V DC). A Battery Management System (BMS) monitors individual cell voltages, temperature, and current. The BMS communicates with the main control unit (inverter/charger) via a CAN bus or similar protocol. Error 70 suggests a disruption in this communication, preventing proper system operation and data reporting. The system relies on precise voltage monitoring for SOC and SOH calculations and safe operation within voltage/current limits.

What to Look For:

Error 70 on the LG RESU Prime indicates a communication fault between the battery modules and the main control unit. System may shut down or operate in a degraded mode, unable to provide backup power. The RESU monitoring app may display connection errors or inaccurate data.

Safety Warning:

Working with battery storage systems involves high DC voltages, which can be lethal. Always disconnect the AC and DC power before performing any maintenance or troubleshooting. Wear appropriate personal protective equipment (PPE), including insulated gloves and safety glasses. Consult the LG RESU Prime system manual for detailed safety procedures. Only qualified electricians should perform repairs on the battery system. NEC Article 706 covers energy storage systems. Comply with rapid shutdown requirements.

Step-by-Step Fix:

1

*Safety First**: Disconnect the AC power to the RESU system at the main service panel. Then, use the DC disconnect switch to isolate the battery from the inverter/charger. Verify zero voltage using a calibrated multimeter.
2

*Visual inspection**: Inspect all CAN bus connectors between the battery modules and the main control unit for corrosion, damage, or loose connections. Clean corroded connectors with a contact cleaner.
3

*CAN Bus Continuity Test**: Using a multimeter, verify the continuity of the CAN bus wires between the battery modules and the main control unit. Check for shorts to ground.
4

*Voltage Check**: Measure the voltage at the CAN bus termination resistor (typically 120 ohms). It should be around 2.5V DC. Abnormal voltage suggests a faulty transceiver or cable.
5

*Firmware Update**: Check the LG Energy Solution website for the latest firmware updates for the RESU Prime system. Use the monitoring app or a qualified technician to perform the update.
6

*Module Isolation (Qualified Technician Only)**: If possible, isolate individual battery modules (after DC disconnect and voltage verification) to determine if a specific module is causing the communication fault. Use a diagnostic tool to read error codes from each module.
7

*licensed technician Repair**: If the problem persists, contact a qualified LG Energy Solution service technician for further diagnosis and repair. Replacement of faulty BMS components may be necessary.

Why This Happens:

Corroded or loose CAN bus connectors between battery modules and the main control unit.
Faulty CAN bus transceiver chip on a battery module or the main control unit.
Software or firmware incompatibility between the BMS and the main control unit.
Damaged or improperly terminated CAN bus cable.
Power supply issue to the BMS, causing intermittent communication failures.
Extreme temperature conditions affecting the BMS components.

Maintenance Tips:

Regularly inspect the battery system for signs of corrosion or damage.
Ensure proper ventilation around the battery modules to prevent overheating.
Keep the firmware up to date to address known bugs and improve system performance.
Periodically check the battery's state of health (SOH) using the monitoring app or a diagnostic tool.
Conduct annual licensed technician inspections by a qualified technician to identify potential problems before they escalate.